![]() ![]() Whether you call it antifreeze or coolant, the fluid is usually a 50-50 mixture of propylene or ethylene and water. It usually pumps the coolant via the radiator, engine block, and cooling system to ensure the system operates at optimum temperatures. Propylene or ethylene is often used as an antifreeze agent.Ī cooling system is primarily considered to be the heart of your vehicle. However, people may, at times, refer to coolant as radiator fluid. Antifreeze works by altering the temperature at which the coolant either boils or freezes. Antifreeze is usually added into a coolant to prevent it from freezing during winter or cold seasons. CoolantĪ coolant is a product manufactured chemically and is premixed with water. While both water and coolant work to cool your vehicle’s engine, the efficiency is not similar. Most people, however, opt to use water rather than the coolant, but is it the best option? Read on this guide to find out which one works better for your car radiator. When asked, a lot of people cannot tell the difference between using a coolant vs. Regular maintenance is vital to ensure the engine lasts. If you love your vehicle or machine, then you must know how important it is to take good care of it. Typically, an engine coolant maintenance is crucial to your engine’s life. Your vehicle’s engine gets rapidly destroyed without a proper cooling system due to the heat produced after internal combustion. ![]() The radiator is the component on your vehicle that helps keep the engine cool. Or, if you’re not confident doing it yourself, your local NRMA mobile mechanic can do it for you.An overheating engine is one problem that you should not ignore. Need help? Book a car serviceĪ few minutes checking under the bonnet could save you a lot of hassle and expense. NRMA Members get discounts at Repco so make sure you check to see if you can find the best price. If the level is low, check the owner’s manual for the correct type of coolant to use and the right way to top up the level for your car. Then locate your coolant reservoir, and make sure that the water level is between the minimum and maximum levels. To check the levels, lift your car’s bonnet, and be sure that it’s secured. The overflow bottle usually has a brightly coloured cap and is connected to the radiator at the front of the car. The coolant level should be between the two marks. Generally, low and high markings on the side of the plastic overflow bottle connected to the cooling system tell you if there is enough coolant in the engine. It's also a good idea to consult your owner's manual at this point as it can guide you through the specifics of your vehicle. Let it sit for a few hours after driving before you remove the radiator cap, otherwise hot coolant can spray out, causing burns. Thankfully, checking the level is an easy job to do.įirst and foremost, before you inspect your car’s cooling system you must ensure the engine is cool. ![]() Coolant, which is often green or red, contains chemicals that stop the liquid from freezing in sub-zero climates and prevents corrosion damage inside the engine.Ĭhecking the level is important as it can prevent problems such as your engine overheating and your vehicle breaking down. It’s not actually water in your engine, but coolant.
0 Comments
Leave a Reply. |